Prg Bad Boy Field Service Manual Bedienungsanleitung PDF herunterladen (Seite 82)

74 BAD BOY

SPOT LUMINAIRE FIELD SERVICE MANUAL

Replacing the Ignitor PCB

Parts:

24.9812.0775 1 EA PCB ASSY, SOLID STATE IGNITOR

Tools:

#2 Philips screwdriver

1/4" Nutdriver

Loctite 242

WARNING: Remove power from luminaire before performing any maintenance procedures.

CAUTION: Always use anti-static precautions when working with PCBs.

To replace the Ignitor PCB:

Step 1. Remove power from luminaire and allow components to cool for at least 5 minutes.

Step 2. At Tilt Yoke Leg, remove Yoke Leg Cover.

Step 3. At Ignitor Cover, remove four 6-32 nylon insert nuts and four #6 nylon washers. Remove Ignitor Cover.

Figure 3-36: Removing Ignitor PCB

CAUTION: Be careful to maintain correct polarity of the lamp wires.

Step 4. At Ignitor PCB, disconnect input and output cables.

Step 5. Remove four 1/4" 6-32 hex standoffs and remove Ignitor PCB.

24V

ED ORN

HOT SW

BULB

WHT

IGNITOR

INPUT

BALLAST

OUTPUT

Ignitor PCB

Ignitor Output

Cable Assembly

Ignitor Input

Cable Assembly

1/4" Hex 6-32

6-32 Nylon

Insert Nut (4)

#6 Nylon

Washer (4)

Standoff (4) - Loctite 242

Cover

Ignitor PCB

Yoke Leg

(Tilt Side)

CAUTION:

Use anti-static precautions

when working with PC boards.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 114 115

Kommentare zu diesen Handbüchern

Keine Kommentare

Prg Bad Boy Field Service Manual Bedienungsanleitung Seite 82

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Prg Bad Boy Field Service Manual