Prg VL6C+ Bedienungsanleitung PDF herunterladen (Seite 34)

26 VL6C+ ™ SPOT LUMINAIRE USER MANUAL

Configure APS6 module(s):

Lamp power for the VL6C+ Spot Luminaire is provided by an APS6 power supply module installed in a Series 300

Modular Rack.

CAUTION: Do not change mode or power setting with power applied to module.

Step 1. At face of APS6 module(s), set rotary power switch to the 700W position (Figure 2-10).

Step 2. Set mode switch to PSET for manual operation.

Step 3. Apply power to lamp by moving circuit breaker switch to the ON position.

Note: The PSET (Preset) mode enables manual control of the module. This is the normal mode of operation. The DCV

(Dimmer Control Voltage) mode operates the module with 0-10Vdc control input. This mode is only required when

using an SPC-36 controller to remotely control modules from a console.

Figure 2-10: APS6 Module

Power Up the Luminaire:

Proceed to "Powering Up the Luminaire" on page 28 for further operating instructions.

PRG

ARC

7257730

MODULE

BREAKER IS OFF

BEFORE

SELECTING POWER.

OFF BEFORE REM

WARNING:UNIT MU URNED

DO NOT UNPLUG H

ENSURE THAT

S300U-06

DCV

PSET

DCV

SHORT

STATUS

IPRES

MODE

3-XXXW

2-700W

1-625W

0-400W

POWER

APS 6

DCV

HORT

DCV

PSET

0-400W

2-700W

1-625W

3-XXXW

POWER

Power Switch

Mode Switch

Circuit Breaker Switch

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare

Prg VL6C+ Bedienungsanleitung Seite 34

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Prg VL6C+